ASTME662 New Generation Electrical Solid Materials Smoke Density Test/Testing Machine
1. Product Description
It is designed according to the relevant standard requirements of ASTM E662, applied to the building materials, solid materials and the determination of tobacco products when making the products.
2. Standards
ASTM E662
3. Technical Parameters
The inner size of the smoke chamber |
Length 914mm±3mm,Width 610mm±3mm,Height 914mm±3mm |
Power |
220V,4KW |
Measurement range |
0-100% |
Measurement accuracy |
±3% |
Power supply |
200-240V 50Hz |
Environment Humidity |
room temperature -40 ºC |
Relative temperature |
≤85% |
Working environment |
During the process of operating the equipment, should avoid not to direct glare, there is no forced air flow phenomena |
Measurement software |
Based on WINDOWS XP interface |
WIN display interface |
to display the transmittance rate and the time curve |
The size of the test samples |
75*75mm |
Source voltage |
4V ± 0.2V |
Light source color temperature |
2200K ± 100K |
The diameter of the velocity of light |
51mm, the computer automatically recorded the smoke density according to lighting change |
There is the ring heater under the lower aperture |
to make the temperature of the light windows is 50 ºC -55 ºC, so that the surface temperature of the smoke density drop to the minimize value |
Heating Cone |
Power 2600W |
|
The signal of the flow meter acquisition and calculate by the computer |
Auxiliary heater |
Power 500W, can make the internal temperature of the test chamber stabilize at 40 ºC ± 10 ºC or 55 ºC ± 10 ºC. |
The change of the test sample weight |
automatic collection and record by the computer, accurate to 1g, the maximum range of the test is1000g |
Gas |
95% of the purity propane, the minimum pressure is 3.5kPa ± kPa. (Customer self-made) |
|
Computer automatic control, collecting, record, and calculate the results, customer self-made the computer |