| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Payment Currency: | USD, HKD, Cny |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Clause | Test | Model | Equipment |
| SH6100 | Power supply | ||
| 5.7 | Humidity preconditioning treatment | SH8910 | Temperature chamber |
| 5.9.2 | ACCESSIBLE PARTS | SH9101A | Test probe B |
| SH9108 | rigid test probe | ||
| SH9115 | Test hood | ||
| SH9110 | Test probe | ||
| SH9121 | Live indicator | ||
| 8.4.2 | ACCESSIBLE PARTS including and APPLIED PARTS | SH9101C | Test probe 3 |
| 8.4.3 | ME EQUIPMENT intended to be connected to a power source by a plug | SH9555 | Residual Voltage tester |
| 8.8.4.1 a) | Mechanical strength and resistance to heat | SH9104C | Ball pressure test device |
| SH8920 | High temperature chamber | ||
| 8.8.4.2 | Resistance to environmental stress | SH9350 | Oxygen aging tester |
| 8.9 | CREEPAGE DISTANCES and AIR CLEARANCES | SH1305 | Creepage distance and air clearance gauge |
| 8.9.1.7 | Material groups classification | SH5241A | Needle flame tester |
| 8.9.3.4 | Thermal cycling | SH8910 | Temperature chamber |
| 8.9.4 | Measurement of CREEPAGE DISTANCES AND AIR CLEARANCES |
SH1305 | Creepage distance and air clearance gauge |
| 8.11.3.5 | Cord anchorage | SH9301A | Power cord pull and torque tester |
| 8.11.3.6 | Cord guards | SH9340 | Cord guard radius meter of curvature |
| 9.2.2.2 | TRAPPING ZONE gaps | 4,8,25,35,50,100,120,180,300,500mm | Gap gauge |
| 9.4.2.1 | Instability in transport position | SH9151 | Inclined meter |
| 9.4.2.2 | Instability excluding transport position | ||
| 9.4.2.3 | Instability from horizontal and vertical forces | SH3113 | Load for instatblity and static/dynamic force test |
| 9.4.2.4 | Movement over a threshold | SH9583 | Threshold test device |
| 9.4.4 | Grips and other handling devices | SH9553 | Grips and handling loading test device |
| 9.5.2 | Cathode ray tubes | SH3115A\SH3115B | Cathode ray tube anti-exposure tester |
| 9.7.5 | Pressure vessels | SH9557 |
Water pressure tester |
| 9.8.3.2 | Static forces due to loading from persons | SH3113 | Load for instatblity and static/dynamic force test |
| 9.8.3.3 | Dynamic forces due to loading from persons | 80kg | Load for instatblity and static/dynamic force test |
| 11.1 | Excessive temperatures in ME EQUIPMENT |
SH9156 | Test corner |
| Temperature recorder | |||
| SH9501 | Winding temperature rise tester | ||
| 11.2 | Fire prevention/RISK of fire in an OXYGEN RICH ENVIRONMENT | SH9517 | Fire prevention and oxygen rich tester |
| 11.3 | Constructional requirements for fire ENCLOSURES of ME EQUIPMENT |
SH5341A | Horizontal vertical flaming tester |
| 11.6.2 | Overflow in ME EQUIPMENT |
10° inclined plaform | |
| SH2100 | High voltage tster | ||
| 11.6.5 | Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS |
SH8102 | Dripping rain tester |
| SH8101 | Oscillastion pipe tester | ||
| SH8104 | Spray test device | ||
| SH8105 | Hand hold raining test device | ||
| SH8106 | Immersion test device | ||
| SH8501 | Dust chamber | ||
| SH9111 | Test probe A/B/C/D | ||
| 15.3 | Mechanical strength |
||
| 15.3.2 | Push test | SH3113 | Load for instatblity and static/dynamic force test |
| 15.3.3 | Impact test | SH9116 | Steel ball impact test device |
| 15.3.4 | Drop test | SH9550C | Hand held ME dropping tester |
| SH9550A | Portable ME dropping tester | ||
| 15.3.5 | Rough handling test | SH9583 | Threshold test device |
| 15.3.6 | Mould stress relief test | SH8920 | Heating oven |
| 15.5.1.1 | Transformer | SH9501 | Winding temperature rise tester |
| SH9551 | Transformer overlaod shortcircuit tester |
){kind=link}