Warranty: | 12 Months |
---|---|
The Peening Cone: | The Angle of 60°to Peening |
Test Temperature: | 650 °-950 ° |
Time Calculator: | 0-999s |
Function: | Peening Wires and Cables Testing |
Payment: | USD, HKD, Cny |
Customization: |
---|
Suppliers with verified business licenses
Electrical Peening Wires and Cables Beating Comprerssion Materials Test/Testing Machine
1. Product Description
Peening wire and cable tester is designed according to the standard of BS6387: This test equipment used to test the wire and cable under the overheating and the over-flow and other unnormal conditions, the flame retardancy function of the insulation layer.
2. Standards
BS6387
3. Technical Parameters
The peening cone | Cuyuan bar which the diameter is ¢ 25 ± 5%,the length is 600 ± 5%,which is divided into two sections 400 and 200mm |
The peening cone | The angle of 60°to peening |
Using the endurable heat compound plate as the test table | The size is 90 X 30 X 9mm,and the weight is about10kg±2kg |
Installed on the metal structure which has rubber wood mat | The length of the square is 25X25mm about 1m |
With Herpes burner | |
When testing the test samples should work in the rated voltage and rated current, with light reflected fringe test status | |
Time calculator | 0-999s, use as the peening cone to calculate the time for every 30 ± 2S |
Test temperature | 650 °-950 °, the diameter of the thermocouple is less than ¢ 2mm |
Suppliers with verified business licenses