IEC60332 Laboratory Wires and Cables Bundle Flame Burning Test/Testing Equipment
1. Product Description
It is designed according to the requirements of IEC60332-1-2.
2. Standards
IEC60332
3. Technical Parameters
Power supply |
AC220V±10%/50Hz |
The average volume |
(1000±100)×(2000±100)mm×(4000±100)mm;Bottom of the chamber should be higher than the ground;the place around the chamber should be well-seald;there is an air input with the size up to(800±20)mm×(400±10)mm from the point which is (150±10)mm to the front wall |
Inside the tester |
There is a thermocouple |
Burner:Propane Burner |
Size : 257×4. 5mm,have 242 holes in all in three rows,each row has 81,80 and 81 holes; Diameter of hole: 1.35mm ;Holes distance:3.2mm |
Double-flowmeter |
Air flow and gas flow table;automatic flame ignitor |
Burning angle |
20° |
Flow flux of the propane |
13.3 ± 0.5L/min;Air flow flux: 76.7 ± 4.7L/min |
Display method |
Digital displayed the all the test parameters |
With wind instrument |
the range ≥0-15m / s |
Test flame supply time |
It is adjustable from 1-99min, can record the flame extinguished time |
Optional Items
1. Water screen smoke and dust removal equipment system, smoke concentration measurement system |
2. Computer type (including computers): DELL, dual-core processor, 19-inch LCD monitor, hard drive 160G, DVD/CD-RW combo, Windows operating system, can freely set up, control and display the test time and data, the data can be stored, and printed. |
3. Can choose to match with the laser printers. |
Experimental site
The main area |
about L1300 mm × W2300 mm × H4500mm |
Control bench |
approximately L860 mm × W700 mm × H1600 mm. |
|
Should have the external exhaust space. |