IEC61034, GB306.1-2007 and BS6387 Prompt Delivery Wires and Cables Smoke Density Materials Test/Testing Machine

• Warranty: 12 Months
• Size of The Burning Chamber: 300mm*300mm*300mm
• Outer Side Material: Iron Material, Spray Treatment
• Test Chamber Inner Material: Su S304 Stainless Steel
• The Light Source: 2900K Color Temperature
• Light Source: Quartz Light Bulb 100W/DC12V
• Model NO.: SH5707B
• Function: Wire and Cable Smoke Density Testing
• Delivery: Within 10-40 Working Days After Order Confirmed
• Transport Port: Guangzhou or Shenzhen Port or Customer′s Required
• Shipment: Ocean or The Customer′s Requirement
• Transport Package: Wooden Box
• Specification: 3000*2000*2000mm
• Trademark: Sunho
• Origin: China Mainland
• HS Code: 9031809090
• Production Capacity: 1500 Sets Per Year

Product Description

Prompt Delivery Wires and Cables Smoke Density Materials Test/Testing Machine

1. Product Description

It is designed according to the relevant standard requirements of IEC61034,GA306.1-2007 and BS6387. Applied to the building materials, solid materials and the determination of tobacco products when making the products.

2. Standards

IEC61034,GA306.1-2007 and BS6387

3. Technical Parameters

Smoke density box test chamber

The size of the burning chamber	300mm*300mm*300mm
Test chamber inner material	SU S304 Stainless steel
The outer side material	Iron material, spray treatment
	With test chamber door and obervation window
	With transparent observation window at both side
	Matching with the spread fan
	Mating with the Centrifugal fan at the top of the test chamber to exhaust the smoke produce when doing the test

Burning device

1. The spark ignition device to ensure the safety of test personnel.

2. Burning test stand

3. Stainless steel alcohol tray

Light path system

The light source	2900K color temperature
The light source calibration systemm	Matching with the standard Filter to calibration the smoke density

Test software

Smoke density	Test software
Size	240mm*140mm/210mm*110mm, the height is 80mm
Light source	Quartz light bulb 100W/DC12V
The device can provide	(12±0.1)V power supply
Smoke density to test the photocell and dustproof shied pipe	the minimum output impedance is less than 100Ω.
	Placed the light source and receiver on both the wall of the light source and receiver placed on both sides of the walls (through the sealed window) in the burning chamber (in the middle position of the wall), and not direct contact with the sealed window, beam of light can pass the fireproof glass of the both sides of the wall to through the burning chamber.
	Photocell mounted on one end of the (150±10 mm)pipe, set the dust-proof windows on the other side
	Equipped with the system which can make the smoke full mixed and the exhaust system
	Laboratories should have air exhaust vent and configuration the exhaust wind volume for the speed is about 7-15 minutes per cubic meter inside
Temperature	Equipped with 0-100°temperature display meter
	In accordance with the standard requirements equipped with wire and cable test support and weights
Equipped with indoor lighting	the device can provide (12±0.1)V power supply
Metal materials of the device	Corrosion-resistant material
Can automatic calibration	regulate the zero degrees (0%) and the full scale (100%) of the luminous flux
	Automatic ignition device