IEC60950 Factory Supplier Durable Electrical Large Current Arc Test/Testing Machine
1. Product Description
The test chamber and the loads boxes are adapt the integral structure design, the upper box is the testing part and the lower parts is the loads box. The material of the test chamber is the painting steel plate structure, the components are manufactured by brass or by stainless steel. It has a pair of electrode, one of it is copper, another is stainless steel, so it can resistance to high temperature and corrosion.
2. Standards
IEC60950
3. Technical Parameters
Designed |
According to the relevant standard requirements of IEC60950 |
Power supply |
AC220V+-10% 50Hz (can order the voltage) |
|
Using a pair of test electrode and the variable emotional impedance load and sentimental, and the transforming power of a link for the exchange. The fixed electrode material in a pair of electrodes is a solid copper conductors, and the parameters is diameter 3.5mm, the top angle is 30°,. The diameter of the another mobile electrode is 3mm, 60 ° angle end of the conical stainless steel sticks, and the angle between the plane and the electrode is 45 ° |
The curvature semi-diameter of the head electrode |
< 0.1 mm |
The mode of Moving the movable electrode |
Automatic and Mechanical - regulated with the buttons "Start" and "Stop |
Moving speed of the electrode |
1 mm / sec. (мм/сек) ,display the electrode moved distance |
After finished the test |
Automatic cut off the power supply |
|
Adjustment the variable emotional impedance load until the power factor is 0.5 ,and the short circuit current is 33A. The separation speed of the mobile electrode is 254 ± 25 mm/s, and the test voltage is 220V-240V. arc frequency is about 40 times per minute |
|
Including the current load |
The inner capacity of the test chamber |
0.1m³ |