IEC60811 Computer Type Wires and Cables Thermal Stability Test/Testing Equipment

• Warranty: 12 Months
• Resolution of The Device: 0.1°c
• Temperature Control System: Pid Logic Control
• Function: Wire and Cable Thermal Stability Test
• Delivery: Within 10-40 Working Days After Order Comfirmed
• Standards: IEC60811
• Model NO.: SH9318
• OEM/ODM: Accepted
• Company Type: High-Tech Enterprise
• Shipment: Ocean or The Customer′s Requirement
• Transportation Port: Guangzhou or Shenzhen or Customer′s Required
• Transport Package: Wooden Box
• Specification: 1000*800*1200mm
• Trademark: Sunho
• Origin: China Mainland
• HS Code: 9031809090
• Production Capacity: 1500 Set Per Year

Product Description

IEC60811 Computer Type Wires and Cables Thermal Stability Test/Testing Equipment

1. Product Description

It is designed according to the relevant standard of IEC 60811-3-2 + IEC60811-3-2/A2 standard, article 9.1.

2. Standards

IEC60811

3. Technical Parameters

Resolution of the device	0.1°C
Required value	shall be set by the temperature control unit of the device,and this temperature value shall be kept within±0.5°C tolerances
Temperature control system	PID logic control
Max.heating capacity of the device	+250°C
All sections of the device	protected against oil vapor,dust and moisture
Oil in the oil bath	changed easily;this procedure shall not influence security of the device and quality of the test adversely
Device compliance with	the related safety conditions
Device operate	with a supply voltage of 220 VAC,60 Hz
Device  calibration certificate	Issued by an accredited organization
Temperature of the oil bath of the device	seen continuously on the temperature display of the device
	It shall be possible to place at least 40 glass tubes specified in article 9.1.a to the device at the same time.Here,glass tubes shall be inserted into the device for 60 mm,and the rest shall stay out.
	Glass tubes shall places so that pH papers placed to their tips during testing will not be influenced by the steam of oil bath of the device
	There shall be a mixer in the bath in order to provide homogeneity of temperature distribution in the oil bath
	There shall be a time clock on the device
	Device shall be protected against roll-over in case of inattentive utilization and against contact with the overheated sections
Materials to be provided with the device	a)5 liters silicone grease resistant to 200°C in addition to the one used in the device. b)500 glass tubes to be used in the oil bath of the device that has one closed end and 110 mm length,5 mm external diameter and 4.0 mm±0,5 mm internal diameter.Glass tubes shall be in compliance with IEC 60811-3-2+IEC60811-3-2/A2 standard,article 9.1.a. c)10 universal indicator paper including pH values from 1 to 10.